Single E-Cigarette Kit // Eleaf Aster RT

  • $105.00NZD In Stock

Product Options



A high powered sub ohm e cigarette designed to blow clouds!

Best suited to someone who prefers a box style 'direct inhale' electronic cigarette. (to learn more about 'direct inhale' CLICK HERE)

A wicked collaboration between the Eleaf Aster RT and the Eleaf Merlot tank keeps your kit nice and compact without compromising on the clouds.

The prebuilt sub ohm coils in the Merlot tank keeps you blowing clouds all day. When it's time to refill with e-liquid; just slide the innovative retractable fill design, fill and close - No more removing the tank from the MOD, it takes less than 5 seconds!

  • Suits any tank with a 510 connection, up to 22mm 
  • Fits in the palm of your hand
  • Temp control, 3 memory settings, wattage, bypass

Inbuilt 18650 batteries gives the MOD a massive 4200mah so it will deliver a fully adjustable power flow (up to 100W) for an impressive length of time. When they're out there's no need to remove for charging, just plug it in and keep vaping - you can vape while it is charging. 

Note - Coils wear out over time. If you notice a lingering burning taste, or your vape production becomes weak, your atomiser will be ready for replacement. Please CLICK HERE to see the replaceable coil option to suit these tanks.


What’s in the kit?

  • 1 x Aster RT MOD
  • 1 x Merlot tank
  • 2x 0.3Ω ER coils
  • 1 x Instructional manual
  • Charge lead
  • Spare seals

Features

  • 5 click protection technology and Auto Off - Click 5 times in 2 seconds to turn ON/OFF.
  • Coil Protection – Auto off when button is depressed for 10 seconds.
  • To Avoid damaging your battery only use NZVAPOR supplied charger kits.

Characteristics  

  • Tank capacity: 3.0ml
  • Battery capacity: 4200 mah
  • Diameter: 40mm(w) x 50mm(d)
  • Height:  95mm
  • Wattage: 1w - 100w
  • Temp control
  • Supports Ti, Ni, Ss and most other coil types
  • Charge time: 1.5 hours






Compatible E-Liquids

This vaping device is a perfect match with our Vapejuice E-liquid range.

To see our range of flavours, click below.

Our High-VG liquids are available in 0mg / 3mg / 6mg







Tip for new users: We strongly suggest 6mg e-liquid or lower with this tank. Sub-ohm tanks produce a higher throat hit than low and standard resistance coils. Using this tank with a nicotine level above 6mg will usually taste very harsh. Users can dilute nicotine based NV Juices with 0mg where required. 


Manufacturer warranty 45 days from the date of purchase.

NZVAPOR ONLY STOCK GENUINE ELECTRONIC CIGARETTES.
BEWARE OF CHEAP CLONES AND IMITATIONS.

Independent Reviews

by our customers

CLICK HERE)

A wicked collaboration between the Eleaf Aster RT and the Eleaf Merlot tank keeps your kit nice and compact without compromising on the clouds.

The prebuilt sub ohm coils in the Merlot tank keeps you blowing clouds all day. When it's time to refill with e-liquid; just slide the innovative retractable fill design, fill and close - No more removing the tank from the MOD, it takes less than 5 seconds!

  • Suits any tank with a 510 connection, up to 22mm 
  • Fits in the palm of your hand
  • Temp control, 3 memory settings, wattage, bypass

Inbuilt 18650 batteries gives the MOD a massive 4200mah so it will deliver a fully adjustable power flow (up to 100W) for an impressive length of time. When they're out there's no need to remove for charging, just plug it in and keep vaping - you can vape while it is charging. 

Note - Coils wear out over time. If you notice a lingering burning taste, or your vape production becomes weak, your atomiser will be ready for replacement. Please CLICK HERE to see the replaceable coil option to suit these tanks.


What’s in the kit?

  • 1 x Aster RT MOD
  • 1 x Merlot tank
  • 2x 0.3Ω ER coils
  • 1 x Instructional manual
  • Charge lead
  • Spare seals

Features

  • 5 click protection technology and Auto Off - Click 5 times in 2 seconds to turn ON/OFF.
  • Coil Protection – Auto off when button is depressed for 10 seconds.
  • To Avoid damaging your battery only use NZVAPOR supplied charger kits.

Characteristics  

  • Tank capacity: 3.0ml
  • Battery capacity: 4200 mah
  • Diameter: 40mm(w) x 50mm(d)
  • Height:  95mm
  • Wattage: 1w - 100w
  • Temp control
  • Supports Ti, Ni, Ss and most other coil types
  • Charge time: 1.5 hours






Compatible E-Liquids

This vaping device is a perfect match with our Vapejuice E-liquid range.

To see our range of flavours, click below.

Our High-VG liquids are available in 0mg / 3mg / 6mg







Tip for new users: We strongly suggest 6mg e-liquid or lower with this tank. Sub-ohm tanks produce a higher throat hit than low and standard resistance coils. Using this tank with a nicotine level above 6mg will usually taste very harsh. Users can dilute nicotine based NV Juices with 0mg where required. 


Manufacturer warranty 45 days from the date of purchase.

NZVAPOR ONLY STOCK GENUINE ELECTRONIC CIGARETTES.
BEWARE OF CHEAP CLONES AND IMITATIONS.

">

Tags: eleaf, aster rt, e-cig

Frequently Asked Questions

  • 1. WHAT LIQUID SUITS MY DEVICE?

    If you use a smaller, less powerful device you will most probably need a liquid with a higher PG ratio (i.e. VG40/60PG). Most smaller devices (often looking like a pen) need a thinner, more runny liquid as small devices often have small inlets around the coil and a thick liquid cant pass through fast enough. These devices are usually used with a ‘mouth to lung’ technique.
     (Click here to see our high PG range)

    If you have a higher powered device you will probably need a high VG e-liquid (i.e.VG70/30PG). A high powered device is often quite large and has very large induction holes in the coil, to allow more juice to flow through. If your liquid is too thin these devices can leak - which is a bit of a pain.
    (Click here to see our high VG range)

  • 2. WHAT DEVICE SUITS ME BEST?

    If you are new to vaping it is important to keep it simple. There is a natural learning curve that you will go through and things that confuse you now will most probably be easy to understand soon. In the meantime keep it simple!

    Most new vapers would use a device that simulates smoking. In this case, a pen style vaping device and a ‘high PG’ e-liquid (i.e. VG40/60PG), would be best suited (using the mouth to lung technique). These devices are generally very simple, smaller and easy to use.
    Click here to learn more about ‘mouth to lung’ technique

    If you’re after a bigger cloud, a larger device might suit. The bigger devices are generally sub ohm and use a high VG e-liquid (i.e. VG70/30PG). These devices are often much more technical and often have things like variable wattage options.
    Click here to learn more about the ‘direct inhale’ technique

    Note – All NZVAPOR devices are regulated and do not carry the risks of Mechanical Mods (which you may have seen on TV).

  • 3. HOW LONG SHOULD MY BATTERIES LAST?

    As would be expected, the more you vape the faster you will use your batteries. Also, the higher that you have your device set to, the faster your batteries will drain.

    All batteries in the NZVAPOR product line are rechargeable.

    If you have removable batteries always check that there are no scratches or chips in the material that wraps around the batteries. If there are any deep scratches or chips, replace the batteries immediately. If your batteries are kept in good condition they should have a life expectancy of 6-12 months.

    All batteries like to stay ‘topped up’ so try to avoid completely draining them every day. They will last much longer if they are charged regularly.

  • 4. HOW LONG SHOULD MY DEVICE LAST?

    All vape devices in the NZVAPOR range have been tested and are used by staff. We only purchase quality products, direct from factory lines, so you can be sure that all products are genuine.

    If you are not the type to need the latest and greatest, product availability and maintain your device well, a device could last well over a year.

    Keep clean, keep dry and keep safe for lengthening the life of your device.

  • 5. HOW LONG WILL IT TAKE TO CHARGE MY DEVICE

    The bigger the battery the longer it will take to charge. If you have a 1500mah battery you should be able to charge in 2-3 hours. A larger 2500mah battery can take around 3-4 hours to charge.

  • 6. DO I NEED TO MAINTAIN MY DEVICE?

    Yes. Regular maintenance of your device will make it last much longer.

    Try to clean contact areas whenever possible.

    Clean leaks if/when they occur.

    Charge regularly

    Replace the coils when needed